= Technical Specification =
Weed 3.0


API Version Changes
-------------------
100 - first release
110 - added WEED_PARAMETER_ELEMENT_PER_CHANNEL
120 - added WEED_YUV_CLAMPING and WEED_YUV_SUBSPACE
130 - added WEED_CHANNEL_RESIZE_ON_ROWSTRIDES_CHANGE
131 - added WEED_FILTER_PROCESS_LAST, removed WEED_COLORSPACE_HSV
132 - added threading hint, and later WEED_CHANNEL_ALPHA_PREMULT

Changelog:
21/04/06 salsaman.
Added notes about WEED_PLANT_UNKNOWN, clarified "max_repeats" for
filters, clarified number of elements in parameter_template
"default". Removed "TODO" from refs. to Weed EVENTS spec. Version number unchanged.

14/08/06 salsaman
Allow channels based on templates with "max_repeats" to be disabled at
any time, even if the template is not marked "optional". Version
number unchanged.

20/08/06 salsaman
Small change to description of "max_repeats". Number of channels may
only be _reduced_ after init(); and only by setting "disabled" to WEED_TRUE. Version
number unchanged.

22/08/06 salsaman
Added "new_default" leaf for parameter templates which have the
WEED_PARAMETER_VARIABLE_ELEMENTS flag set. Version number unchanged.

24/08/06 salsaman
Added "ignore" leaf for parameters for use in interpolation where the
"value" contains a list. Version number unchanged. Removed
WEED_PLANT_UNKNOWN since it is not part of the API.

24/09/06 salsaman
Corrected/clarified some parts of the text. API unchanged.

30/10/06 salsaman
Add host-only function weed_leaf_delete(). Since it is host only, API
version is unchanged.

11/12/06 salsaman
Added WEED_CHANNEL_FOLLOWS_OUTPUT and
WEED_PARAMETER_ELEMENT_PER_CHANNEL. Updated spec to 1.1 and API
version to 110.

13/12/06 salsaman
Add optional "target_fps" to filter_instance, change it from an array to a
single value. API version unchanged.

25/07/07 salsaman
Add filter flag WEED_FILTER_HINT_IS_POINT_EFFECT. API version unchanged.

27/03/08 salsaman
Corrected some typos and clarified about passing function pointers.

07/06/08 salsaman
Updated to libweed. Spec is now at version 3.0. Moved text around to split into Weed and
Weed Effects.

14/06/08 salsaman
Add YUV_clamping, YUV_subspace. Remove "h_shift" and "v_shift". Allow
generators to set channel sizes, but they should attempt to use the
host set size. Clarified some points. API version was updated to 120.

03/11/08 salsaman
Removed requirement that weed plugin file extensions be .wo, since this was discovered to be non-portable.


11/10/09 salsaman
Correct a typo, and try to further clarify about function passing.

31/10/09 salsaman
Correct WEED_FILTER_HINT_STATELESS -> WEED_FILTER_HINT_IS_STATELESS

9/11/09
Added WEED_CHANNEL_RESIZE_ON_ROWSTRIDES_CHANGE
API Version to 130

5/02/10 salsaman
Clarified text about default getter and bootstrap process.

7/02/10 salsaman
Removed WEED_COLORSPACE_HSV, deprecated WEED_FILTER_FOLLOWS_OUTPUT, 
added WEED_FILTER_PROCESS_LAST

16/04/10 salsaman
Clarified meaning of YUV_subspace

22/09/10 salsaman
Clarified YUV_subsampling, *changed value of default*.

21/10/10 salsaman
Clarified text about plugin data and icon directories.

17/03/11 salsaman
Switched WEED_FILTER_HINT_IS_POINT_EFFECT to WEED_FILTER_HINT_NO_THREADING **

6/08/11 salsaman
Corrected spelling error WEED_HINT_INT -> WEED_HINT_INTEGER

7/01/12 salsaman
Add clarifying notes about out parameters.


19/01/12 salsaman
Add channel flag WEED_CHANNEL_ALPHA_PREMULT. API unchanged.

23/01/12 salsaman
Clarified range for AFLOAT.

29/07/12 salsaman
** Corrected name of flag and description to WEED_FILTER_HINT_MAY_THREAD

15/11/12 salsaman
added clarifying remarks for number of values in parameter defaults.

01/03/13 salsaman
corrected description about static function versions

17/03/13 salsaman
added "extra_authors" leaf for plugin_info. Corrected description about static functions for plugins.
added "rowstride_alignment_hint" for channel templates.

17/09/2013 salsaman
Clarified description of "group" leaf for WEED_HINT_SWITCH parameter templates.

12/10/2013 salsaman
Add "hidden" option to filter_class gui.

(C) Gabriel "Salsaman" Finch 2005 - 2013

With contributions by: Niels Elburg, Dennis "Jaromil" Rojo, Andraz
Tori, and Oyvind "Pippin" Kolas.

Weed is an object system developed for video/audio processing. Weed
currently has modules for video/audio effects (weed-effects), and for
timeline style events (weed-events).


== WEED_API_VERSION ==

This is defined as 131 for this version of the specification. This
number will be increased for future revisions of the spec. if a
function or a symbol is changed or added.


== WEED PLANTS ==

A ''plant'' in Weed is a set of one or more ''leaves''.

Each plant has one mandatory leaf with a key "type", and depending
upon the value of this leaf, the plant has other mandatory and optional leaves.

For this API, the value of the plant leaf "type" MAY be one of:

  * WEED_PLANT_HOST_INFO          : Information about host and core functions
  * WEED_PLANT_PLUGIN_INFO        : Information about plugin and list of filter classes it includes
  * WEED_PLANT_FILTER_CLASS       : Descriptive information about single filter class
  * WEED_PLANT_CHANNEL_TEMPLATE   : Information about what kinds of channels filter accepts
  * WEED_PLANT_PARAMETER_TEMPLATE : Information about what kinds of parameters filter has
  * WEED_PLANT_FILTER_INSTANCE    : All data about an instance
  * WEED_PLANT_CHANNEL            : Instantiation of a channel
  * WEED_PLANT_PARAMETER          : Instantiation of a parameter

  * WEED_PLANT_GUI                : Used for GUI hints for the
                                    filter_classes and parameter_templates.

  * WEED_PLANT_EVENT              : plant used for events (described
                                            in the Weed EVENTS extension
  * WEED_PLANT_EVENT_LIST         : plant used for event lists (described
                                            in the Weed EVENTS extension

"type" is a single valued leaf with seed_type WEED_SEED_INT (See
below: seed_types).

The "type" is passed as a parameter in the weed_plant_new() function.
This function returns a pointer to newly allocated plant with the "type" leaf set
to the plant_type.

Plant types >=512 are reserved for custom use.

== LEAVES ==

As mentioned above, each "plant" is simply a set of one or more "leaves".

Each leaf has:
 * a ''key'' (which is a non-NULL string - (const char *) ASCII encoded)
 * a ''value'' (0 or more elements)
 * ''number of elements'' (>=0) contained in the value field.
 * a ''seed_type''
 * a bitmap ''flags'' field

== SEED TYPES ==

The "seed type" denotes the type of the value field in a leaf. Weed offers the following '''fundamental''' types (number <64):[[BR]]

 * WEED_SEED_INT     : signed int32_t
 * WEED_SEED_DOUBLE  : corresponds to C type "double"
 * WEED_SEED_BOOLEAN : signed int32_t, constrained to take values WEED_FALSE or WEED_TRUE 
 * WEED_SEED_STRING  : array of char (max length is size_t max for whatever system)
 * WEED_SEED_INT64   : 64bit signed integer, used for sub-microsecond timecodes

'''Note''': STRINGS are all utf-8 encoded in Weed, except leaf Keys, which are ASCII encoded.

'''Pointer''' types (number>=64 and <512):

 * WEED_SEED_VOIDPTR     : corresponds to C void * type
 * WEED_SEED_PLANTPTR    : weed_plant_t * : a pointer to another weed
   plant [Note: - we could use a void * and cast it, but sometimes it
    is clearer when we are referring to a leaf which is iself a plant.]

Types >=512 are reserved for custom use. Custom seeds MUST be pointer seeds.

== LEAF RESTRICTIONS ==

The "type" leaf of a plant is automatically set READONLY for the plugin in weed_plant_new().
See below: leaf flags. The "type" leaf should not be changed by the host.

== GETTING/SETTING LEAF VALUES ==


On calling weed_leaf_set(), the host/plugin programmer does not need to 
worry about allocating and freeing memory for the data to store. 
The model (or more precisely the Mediation layer) will take care of that for you. 
If you store an object the model will make a copy and store that. 
Later, when you set a new value in this leaf, the model will automatically weed_free() 
the old value and make a copy of the new value and store the copy. 

The exception to this is any seed type of type PTR. If you allocate a
chunk of data or a complex structure only the pointer value is stored
(!). The model does not know anything about the content of the data
your pointer refers to so it will not make a copy. Instead, you need
to allocate and free the memory yourself in this case. In other words,
pointer types are "store by reference".

The plugin and host programmer can both retrieve and set values by Key.

On weed_leaf_get(), Weed will copy the data stored in the leaf, except for pointer types. 
For pointer types only the *reference* to the memory block is copied. If you retrieve 
a string, the copy of the string retrieved should be freed with weed_free() after use.


== WEED CORE FUNCTIONS ==

 * weed_init(int api_version, weed_malloc_f weed_malloc_function,
   weed_free_f weed_free_function, weed_memset_f weed_memset_function,
   weed_memcpy_f weed_memcpy_function)

   : The host must call weed_init()
     before using any other weed functions. The host passes in the
     highest API version it supports. The function will set function
     pointers to the correct API versions of the core functions. The
     host also passes in its malloc, free, memset and memcpy
     functions. These are for use by the host - different versions of
     these may be passed to a plugin (see below, host_info). If a NULL
     is passed instead, then a standard function: malloc, free, memset
     or memcpy will be used.

 * weed_plant_t *weed_plant_new (int plant_type)

 * char **weed_plant_list_leaves (weed_plant_t *plant) // returns NULL terminated char * array of leaves

 * int weed_leaf_set_caller (weed_plant_t *plant, const char *key,
      int seed_type, int num_elems, void *value,  int caller) // returns a weed error

   This is an internal function.

   In HOST_INFO, host passes plugin pointers to:
   int weed_leaf_set_plugin (weed_plant_t *plant, const char *key,
      int seed_type, int num_elems, void *value) // returns a weed error
   This calls the above function with caller set to WEED_CALLER_PLUGIN

   The host should use its own version: weed_leaf_set(). This calls
   the setter function with WEED_CALLER_HOST. This is all
   set up in weed_init().


 * int weed_leaf_get (weed_plant_t *plant, const char *key, int idx, void *value) // returns a weed error 

 * int weed_leaf_num_elements (weed_plant_t *plant, const char *key)

 * size_t weed_leaf_element_size (weed_plant_t *plant, const char *key, int idx) // returns byte size of element

 * int weed_leaf_seed_type(weed_plant_t *plant, const char *key)

 * int weed_leaf_get_flags(weed_plant_t *plant, const char *key);

The host needs to implement the following functions itself:

 * void *weed_malloc_f (size_t size)
 * void weed_free_f (void *ptr)
 * void *weed_memset_f (void *s, int c, size_t n)
 * void *weed_memcpy_f (void *dest, const void *src, size_t n)

These four function prototypes are fixed across all API versions. This is
due to linker limitations with the weed-utils library. However, the
host may pass a different version of these functions with the same
type to a plugin. This may be useful for memory profiling a particular plugin.

The host has access to additional functions which are not passed to the plugin
in the HOST_INFO plant:

 * void weed_plant_free (weed_plant_t *plant) // only used by host

 * int weed_leaf_set_flags(weed_plant_t *plant, const char *key, int flags);
   See Leaf Flags below.

 * int weed_leaf_delete (weed_plant_t *plant, const char *key); //
   only used by host

'''Notes''':[[BR]]
weed_plant_new() will set the "type" leaf to the plant_type, and will
set it READONLY for the plugin.

weed_leaf_set() will create the leaf if the leaf does not exist.

weed_leaf_set() will return WEED_ERROR_LEAF_READONLY, depending on
the leaf flags and the function caller.

weed_leaf_set() will return an error WEED_ERROR_WRONG_SEED_TYPE if you try to change the seed_type of a leaf.




For weed_leaf_set(), num_elems can be 0 and value can then be
NULL. In this way, just the seed_type of a leaf can be set, without
setting an explicit value.

weed_leaf_get() will return WEED_ERROR_NOSUCH_LEAF if a leaf does not exist.
In this way the existence of a leaf can be determined. To assist with this, weed_leaf_get() 
can be called with a NULL void * value. The function will then not attempt to copy the value, 
but will return either WEED_ERROR_NOSUCH_LEAF, WEED_ERROR_NOSUCH_ELEMENT, or WEED_NO_ERROR 
depending on whether the leaf/element exists or not.

weed_leaf_set_flags() will return WEED_ERROR_NOSUCH_LEAF if the leaf does not exist.

weed_leaf_delete() will return WEED_ERROR_LEAF_READONLY if the leaf is
readonly for the host. It will return WEED_ERROR_NOSUCH_LEAF if the
host tries to delete a non-existent leaf, or the "type" leaf.

The return values of weed_leaf_num_elements(),
weed_leaf_element_size(), weed_leaf_get_flags(), and weed_leaf_seed_type() are all undefined if the leaf/element does not exist.

The void * for weed_leaf_set() and weed_leaf_get() is a (void *) typecast to/from an *array* of the appropriate type:
e.g. for WEED_SEED_INT it is an int *. The number of elements in the array MUST match num_elems in weed_leaf_set().

The weed_function_t is a pointer to a function, which may be cast
to/from a pointer to any function type.

Functions weed_malloc_f(), weed_free_f(),
weed_memset_f(), weed_memcpy_f() have exactly the same
semantics as malloc, free(), memset() and memcpy() from libc. Their
purpose is to allow a host to provide a plugin with the
application-specific memory managment. 
Plugins SHOULD NOT use malloc, free and memset, but instead use the weed counterparts. 

== WEED ERRORS ==

Weed defines some core error codes, which may be returned by the core functions:

 *  WEED_NO_ERROR[[BR]]
    return code means no problem

 *  WEED_ERROR_MEMORY_ALLOCATION[[BR]]
    memory allocation has failed

 *  WEED_ERROR_LEAF_READONLY[[BR]]
    plugin/host tried to set readonly leaf; returned from
    weed_leaf_set_*() and weed_leaf_delete()

 *  WEED_ERROR_NOSUCH_ELEMENT[[BR]]
    plugin/host tried to read value of an invalid element number in a leaf; returned from weed_leaf_get()

 *  WEED_ERROR_NOSUCH_LEAF[[BR]]
    leaf does not exist for the specified plant; returned from
    weed_leaf_get() and weed_leaf_delete()

 *  WEED_ERROR_WRONG_SEED_TYPE[[BR]]
    once the seed_type of a leaf is set, you cannot change
    it. weed_leaf_set_*() will return this error if
    you attempt such a thing, and the value of the leaf will not be amended.

== WEED UTILITY FUNCTIONS ==

To make life easier for host and plugin writers, there exists a Weed
utility library, which wraps some of the core functions in simpler
variants. This is documented in the Weed Utility Library spec. (TODO).

== COMPILING A HOST WITH WEED ==

A host wishing to use the referenc build of Weed should be linked 
(shared or static) with libweed, and #include
(at least) <weed/weed.h> and <weed/weed-host.h>

If the host makes use of the Weed Utility Library, it may also be 
linked (shared or static) with libweed-utils, and #include <weed/weed-utils.h>

If the host wishes to use Weed effects, it should #include
<weed/weed-effects.h> and probably <weed/weed-palettes.h>.

If the host wishes to use Weed events, it should #include
<weed/weed-events.h>.

<weed/weed-compat.h> is provided for compatibily with some external libraries.



Compiling a plugin with Weed is dealt with below.


== Pre-processor symbols ==
The weed header uses the following pre-processor symbols:

==== HAVE_WEED_PLANT_T ====

The reference implementation provides default (simplest)
implementations of a Weed plant. This can be overriden at compile time using:
{{{
#define HAVE_WEED_PLANT_T
}}}
before
{{{
#include <weed/weed.h>
}}}

This need only be done in the host.
In this way a host can provide its own defintion of a Weed plant, and
provide its own implementation of the core functions, whilst still making
use of the rest of the header file.

==== Caller types ====
A caller type is passed into weed_leaf_set_caller(). The plugin is
provided with a pointer to a wrapper function which sets the caller to
WEED_CALLER_PLUGIN.

The host is provided with a wrapper function which sets the caller to
WEED_CALLER_HOST.

 * WEED_CALLER_HOST

 * WEED_CALLER_PLUGIN

This is handled internally by the Weed library.

==== Leaf flags ====

 * WEED_LEAF_PLUGIN_READONLY
   The leaf is readonly for the plugin. weed_leaf_set_caller
   uses this flag and the WEED_CALLER to allow/disallow value changes.
   This MUST only be used where indicated in this specification. It
   does not prevent changes to the value by the host.

 * WEED_LEAF_HOST_READONLY
   The leaf is readonly for the host. weed_leaf_set_caller
   uses this flag and the WEED_CALLER to allow/disallow value changes.
   The host may set this flag to prevent accidental changes to
   leaf values. It does not prevent changes to the value by the plugin.

Flag bits >=30 are reserved for custom flags.

==== Other symbols ====

WEED_TRUE is #defined as 1 in the header.

WEED_FALSE is #defined as 0 in the header.

WEED_API_VERSION is #defined as 131 in the header.

WEED_API_VERSION_131 is also #defined in the header.















== WEED EFFECTS EXAMPLE ==

Since the main purpose of Weed is for video effects, a description is
included here, as an example of how Weed can be used.

There is also a Weed Audio Extension, and a Weed Events Extension,
which are documented separately.



== COMPILING A PLUGIN WITH WEED ==

An effects plugin wishing to use the reference build of Weed 
should #include <weed/weed.h>, <weed/weed-palettes.h>,
<weed/weed-effects.h> and (optionally) <weed/weed-plugin.h>

<weed/weed-compat.h> is provided for compatibility with some external libraries.


Plugins MUST declare their versions of the Weed functions as static. This is because they are set through the API
from the host. If the functions were not declared static in the plugin then setting them would also set the host's 
version, which could very well cause problems and crashes in the host.

As a consequence of this, if the plugin wishes to use any of the weed functions (or indirectly, weed-utils or weed-plugin-utils functions), this 
MUST be done from within the plugin itself. In the Weed SDK this is done by #including the source code for two files:
weed-utils-code.c and weed-plugin-utils.c. Including these files directly ensures that the static versions of the Weed functions are used.

Plugins should NOT be linked directly with libweed, libweed-utils or any other Weed library which uses the Weed API directly.

Obviously this solution is far from ideal, but it appears to be the only way to override functions in standard C code.

Better solutions may be developed in future.







== PLANT TYPES ==

There now follows a description of the various plant types for weed effects, 
and their mandatory and optional leaves.

== PLANT TYPE HOST_INFO ==

 * "type" == WEED_PLANT_HOST_INFO

'''Mandatory leaves''':[[BR]]
 
 * "api_version" : WEED_SEED_INT : weed api version selected by host,
   will be one of the api versions passed by the plugin in the
   bootstrap function [see below]
 * "weed_leaf_get_func" : WEED_SEED_VOIDPTR : pointer to function pointer to weed_leaf_get function; versions should match "api_version"

 etc for all functions (except weed_leaf_set_flags,
 weed_plant_free, and weed_leaf_delete)

'''Optional leaves''': [[BR]]

 * "host_name" : WEED_SEED_STRING : host name
 * "host_version" : WEED_SEED_STRING : host version


== PLANT TYPE PLUGIN_INFO ==

The plugin_info plant is returned from the plugin setup function weed_setup(), to tell the host what
filter classes are available in that plugin. After receiving this plant, the host should
set all leaves in it READONLY for the plugin and should not change any leaf
values itself.

 * "type" == WEED_PLANT_PLUGIN_INFO

'''Mandatory leaves''':[[BR]]

 * "host_info"	  : WEED_SEED_PLANTPTR : pointer to the HOST_INFO
   plant returned from the host in weed_bootstrap()

 * "filters"	  : WEED_SEED_PLANTPTR : array of pointers to the filters in the plugin
 * "version"	  : WEED_SEED_INT : plugin package version


'''Optional leaves''':[[BR]]

 * "maintainer"	  : WEED_SEED_STRING : maintainer of plugin package
 * "url"	  : WEED_SEED_STRING : URL of plugin package

== PLANT TYPE FILTER_CLASS ==

Plant type filter_class is used to describe all properties of a single
filter in a plugin. It is created by the plugin in weed_setup() and
then added to the plugin_info plant. All leaves in this plant should be set READONLY for
the plugin after weed_setup(), and should not be altered by the host.

"type" == WEED_PLANT_FILTER_CLASS

'''Mandatory leaves''':[[BR]]

 * "name"         : WEED_SEED_STRING : the filter name; MUST be unique in the plugin, 
 * "author"       : WEED_SEED_STRING : the filter author(s) - DO NOT change this unless a new "version" of the plugin is made - instead add to the 
                      "extra_authors" leaf (see below)
 * "version"      : WEED_SEED_INT : filter version. Adding more parameters does not require a version update. However, removing parameters, changing 
   		    their order or type, adding or removing channel templates does require an update. Prior versions of the filter MUST be left in 
		    plugin, as hosts may be using them.
 * "process_func" : WEED_SEED_VOIDPTR : pointer to the process_func()
 * "plugin_info"  : WEED_SEED_PLANTPTR : pointer to the PLUGIN_INFO plant containing this FILTER_CLASS

'''Optional leaves''': [[BR]]

 * "flags"        : WEED_SEED_INT : bitmap of filter flags
 * "init_func"    : WEED_SEED_VOIDPTR : pointer to the init_func()
                    (can also be NULL)
 * "deinit_func"  : WEED_SEED_VOIDPTR : pointer to a the deinit_func()
                    (can also be NULL)
 * "in_channel_templates"    : WEED_SEED_PLANTPTR, list of 0 or more elements: array of inp channel templates, '''type''' of the referenced plant MUST be  WEED_PLANT_CHANNEL_TEMPLATE
 * "out_channel_templates"   : WEED_SEED_PLANTPTR, list of 0 or more elements : array of out channel templates, '''type''' of the referenced plant MUST be  WEED_PLANT_CHANNEL_TEMPLATE
 * "in_parameter_templates"  : WEED_SEED_PLANTPTR, list of 0 or more elements : array of in parameter templates, '''type''' of the referenced plant MUST be  WEED_PLANT_PARAMETER_TEMPLATE
 * "out_parameter_templates" : WEED_SEED_PLANTPTR, list of 0 or more elements : array of out parameter templates, '''type''' of the referenced plant MUST be  WEED_PLANT_PARAMETER_TEMPLATE.

 * "extra_authors": WEED_SEED_STRING : list of extra authors which can be altered without changing the plugin "version"
 * "description"  : WEED_SEED_STRING : filter description
 * "url"          : WEED_SEED_STRING : filter URL
 * "license"      : WEED_SEED_STRING : license of filter
 * "target_fps"   : WEED_SEED_DOUBLE : plugin can inform the host of
                                       the target fps rate(s) for the
                                       host to run the plugin. 
				       Host should set "fps" for the
				       instance in this case.

 * "gui" : WEED_SEED_PLANTPTR : pointer to a plant
           type GUI [see below - GUI plants]. The host should not change this value, or any of the
           leaves inside it. The plugin may create it and set leaves
           it in weed_setup().

 * Every plugin can store internal data in leaves inside the
   filter_class  plant, and host MUST NOT change their values. Those internal leaves MUST have keys prefixed with "plugin_"

== PLANT TYPE FILTER_INSTANCE ==

Plant type filter_instance is created by the host, and used to hold all data that are related to
a single instance of the filter. Mandatory leaves SHOULD be set
READONLY for the plugin by the host after weed_setup(), and should
not be altered by the host. 
Optional leaves created by the host MAY be set READONLY for the plugin.

The host examines a filter_class and prepares a filter_instance from
it. After this the host can pass the filter_instance into the filter's
init_func() [if the plugin has one] to prepare to use it.


"type" == WEED_PLANT_FILTER_INSTANCE

'''Mandatory leaves''':[[BR]]
 * "filter_class"   : WEED_SEED_PLANTPTR : Pointer to a filter_class plant
 that this filter instance is based on. MUST be one of the filters
 returned in the plugin's plugin_info plant.


The following are mandatory only if there are corresponding templates
in the filter class:

 * "in_channels"    : WEED_SEED_PLANTPTR, list of 0 or more elements : array of in channels, '''type''' of the referenced plants MUST be WEED_PLANT_CHANNEL
 * "out_channels"   : WEED_SEED_PLANTPTR, list of 0 or more elements : array of out channels , '''type''' of the referenced plants MUST be WEED_PLANT_CHANNEL
 * "in_parameters"  : WEED_SEED_PLANTPTR, list of 0 or more elements : array of in parameters, '''type''' of the referenced plants MUST be WEED_PLANT_PARAMETER
 * "out_parameters" : WEED_SEED_PLANTPTR, list of 0 or more elements : array of out parameters, '''type''' of the referenced plants MUST be WEED_PLANT_PARAMETER





The following is mandatory if the plugin sets "target_fps" for either
filter_class or filter_instance:

 * "fps" : the current target fps of the host running the instance
   (i.e frequency at which it attempts to call process_func() ).

Other optional leaves:

 * "target_fps"   : WEED_SEED_DOUBLE : plugin can inform the host of
                                       the target fps rate(s) for the
                                       host to run the instance.
				       Host should set "fps" for the
                                       instance in this case. Host may
                                       optionally 
                                       set this READONLY_PLUGIN after
                                       the plugin has set it, or may
                                       ignore it.

 * "rowstride_alignment_hint" : WEED_SEED_INT : this is a *hint* to the host that the plugin prefers rowstrides aligned to a certain byte size. It 
  			       		     may be ignored by the host.		      


 * Every plugin can store internal data in leaves
 inside this plant, and host MUST NOT change their values or make them
 READONLY for the plugin. Those internal leaves MUST have keys
 prefixed with "plugin_". The plugin is responsible for weed_free()ing
 any memory buffers in the deinit_func.

== PLANT TYPE CHANNEL_TEMPLATE ==

Plant type channel template is used as a description of a single
channel (input or output) a filter can handle. All leaves SHOULD
be set READONLY for the plugin after weed_setup(), and should not
be altered by the host.

 * "type" == WEED_PLANT_CHANNEL_TEMPLATE

'''Mandatory leaves for all channels''': [[BR]]

 * "name" : WEED_SEED_STRING  : name of the channel, MUST be unique across all channels in the filter class

'''Mandatory leaves for channels with video''': [[BR]]

 * "palette_list" : WEED_SEED_INT   : the plugin sets this to an
 array of allowed palettes for the channel. Its order is plugin's
 preference for a palette. If this leaf is missing, the channel
 only supports audio.

'''Mandatory leaves for channels with audio''': [[BR]]

 See the weed AUDIO extension.

'''Optional leaves for all channel types''': [[BR]]

 * "flags" : WEED_SEED_INT : bitmap of channel_flags that plugin sets

 * "description"  : WEED_SEED_STRING : description of this channel

 * "optional"     : WEED_SEED_BOOLEAN : the plugin may set this to
                    WEED_TRUE for channels that can be left out at initialization time. If
                    the host decides not to use the channel, it must set "disabled" to
                    WEED_TRUE for the channel. The host must reinit
                    the instance if a channel is enabled or disabled after init_func().

 * "max_repeats" : WEED_SEED_INT : maximum number of channels that
      the host can create from this template. A value of 0 indicates
      any number (limitless). If not present, "max_repeats" is assumed to be 1.
      If the channel_template is marked "optional", then the minimum number of this
      channel_template is 0, otherwise it is 1.

      If "max_repeats" is present, the number of repeats may be changed
      [reduced] by the host after init() and between processing calls without the need to re-initialise the
      plugin. In all other cases, a change in the number of channels requires
      the plugin to be re-initialised. 
      The number of channels may only be altered [reduced] by setting
      "disabled" to WEED_TRUE for one or more channels created from
      this template. This is allowed even if the template is not marked "optional" - though in the latter case the number 
      of non-disabled repeats must always be at least 1.

 * Every filter can have its internal data stored in leaves
 inside this plant, and host MUST NOT change their values or make them
 READONLY for the plugin. Those internal leaves MUST have keys
 prefixed with "plugin_"


'''Optional leaves for channels with video''': [[BR]]

 * "width" : WEED_SEED_INT    : If set, frame width in pixels that a
   plugin can handle. If it is set, host is forbidden to set the width
   in channel instance to anything else. For YUV packed type palettes, the
   width is in macropixels (e.g for WEED_PALETTE_UYVY888, it is the
   width in UYVY macropixels). For planar YUV palettes, it is measured
   in the Y plane.

 * "height" : WEED_SEED_INT   : If set, frame height in pixels that a plugin can handle. If it is set, host is forbidden to set the height in channel instance to anything else 

 * "hstep" : WEED_SEED_INT : If set, the host must set the channel width to a multiple of this (in pixels). Should be avoided if possible for performance reasons.

 * "vstep" : WEED_SEED_INT : If set, the host must set the channel height to a multiple of this (in pixels). Should be avoided if possible for performance reasons.

 * "maxwidth" : WEED_SEED_INT : If set, the host must set the channel width <= maxwidth (in pixels)

 * "maxheight" : WEED_SEED_INT : If set, the host must set the channel height <= maxheight (in pixels)

 * "alignment" : WEED_SEED_INT : If set, each element in "pixel_data" will be aligned
                             to this many bytes boundary. Must be a
                             power of 2, and a multiple of
                             sizeof (void *). Eg. if set to 16, the
                             address of each element (plane) in "pixel_data" will
                             be divisible by 16. Should be avoided if possible for performance reasons.

 * "YUV_sampling"     : WEED_SEED_INT : Sampling type for YUV
                                        palettes, defined
                                        below. Default is mpeg if not set.

 * "YUV_clamping"     : WEED_SEED_INT : Clamping type for YUV
                                        palettes, defined below -
                                        Host should only use unclamped
                                        if plugin prefers it. Default
                                        is clamped, if not set.

 * "YUV_subspace"     : WEED_SEED_INT : Subspace (Y'CbCr digital, Y'UV
                                        analog or BT.709) type for YUV
					Effect plugins generally can ignore this.


'''Optional leaves for channels with audio''': [[BR]]

 See the weed AUDIO extension.


== PLANT TYPE CHANNEL ==

Plant type channel is used as a fixation of channel plants that the
host sets and plugin reads to know what it is getting. All leaves
SHOULD be set readonly for the plugin by the host.


Channels MUST be added in the order of channel_templates, bearing in
mind the template leaves "optional" and "max_repeats". After
initialisation, channels MUST NOT be added or removed without reinitialising the plugin.

 * "type" == WEED_PLANT_CHANNEL

'''Mandatory leaves for all channel plants''': [[BR]]
 * "template" : WEED_SEED_PLANTPTR : Pointer to a channel
 template plant this channel instance is based on.

'''Mandatory leaves for channel plants with video''': [[BR]]
 * "timecode" : WEED_SEED_INT64 : video frame time in ticks (1/100 of a microsecond) for this channel
 * "width" : WEED_SEED_INT    : The chosen frame width in pixels. For
  YUV packed type palettes, the width is in macropixels (e.g for
  WEED_PALETTE_UYVY888, it is the width in UYVY macropixels). For
  planar YUV palettes, it is measured in the Y plane.
 * "height" : WEED_SEED_INT   : The chosen height in pixels
 * "current_palette" : WEED_SEED_INT: The chosen palette, which must be one of the palettes contained in "palette_list" of a channel template
 * "pixel_data" : WEED_SEED_VOIDPTR    : array of n pointers to
 the image pixel data. Depending on the value of "current_palette",  there is 1 element for packed palettes, >1 elements for planar palettes
 * "rowstrides" : WEED_SEED_INT     : array carrying the row width of EACH PLANE in bytes (include padding). Number of elements
 must match with number of elements in "pixel_data".

'''Mandatory leaves for channel plants with audio''': [[BR]]

 See the weed AUDIO extension.

'''Optional leaves for all channel plants''': [[BR]]
 * "disabled"     : WEED_SEED_BOOLEAN : the host MAY set this to
                    WEED_TRUE before calling init_func() if the corresponding channel template
                    has "optional" leaf set to true. Host MUST NOT change this without
                    reinitialising the instance. The one exception is if
		    the channel is based on a template which has
		    "max_repeats" set, in which case a channel from
		    that template may be disabled at any time between
		    processing calls.

 * "flags"        : channel flags set by host. e.g WEED_CHANNEL_ALPHA_PREMULT.


 * Every filter can have its internal data stored in leaves
 inside this plant, and host MUST NOT change their values or make them
 READONLY for the plugin. Those internal leaves MUST have keys
 prefixed with "plugin_". The plugin is responsible for weed_free()ing
 any memory buffers in the deinit_func.

'''Optional leaves for channel plants with video''': [[BR]]

 * "offset" : WEED_SEED_INT : host can achieve multithreading by splitting destination frames into slices, calling the 
   	      		      process_func several times with different "offset"s and reduced height in the 
			      destination channel. Offset is the number of rows offset of "pixel_data" in the destination 
			      frame(s). Will only be used if the plugin sets the filter flag bit WEED_FILTER_HINT_MAY_THREAD.

 * "pixel_aspect_ratio"   : WEED_SEED_DOUBLE : physical aspect ratio
                                               of the pixel of the image (pixel aspect ratio 
                                               different than 1.0
                                               means pixels are non-square) [set by host]


If the plugin sets any of these in the channel_template, and the host is using a YUV
"current_palette", host should try to match plugin preference where
possible, and process video accordingly:

 * "YUV_sampling"     : WEED_SEED_INT : Preferred sampling type for YUV
                                        palettes, host should try to
                                        match if plugin set it in template

 * "YUV_clamping"     : WEED_SEED_INT : Preferred clamping type for YUV
                                        palettes, host should try to
                                        match if plugin set it in template

 * "YUV_subspace"     : WEED_SEED_INT : Preferred YUV Subspace (see below)
                                        type for YUV palettes, host should try to
                                        match if plugin set it in template
					Generally not needed.


'''Optional leaves for channel plants with audio''': [[BR]]

 See the weed AUDIO extension.



== PLANT TYPE PARAMETER_TEMPLATE ==

Plant type parameter_template is used as a description of a single
parameter (input or output) filter can handle. All leaves SHOULD be set readonly for the plugin by the host after
weed_setup(). Host should only change the "default" value to a valid
value for the parameter. The host should not change any other leaves.

'''Mandatory leaves''': [[BR]]
 * "name" : WEED_SEED_STRING  : name of the parameter, MUST be unique across the in_parameters/out_parameters

 * "default" : default value(s) of the parameter : usually must contain at
               least one element, but may have 0 elements for parameters which have
               the WEED_PARAMETER_VARIABLE_ELEMENTS flag set. [0 elements means the leaf
	       exists but has no value, since the SEED_TYPE must be known.]. Required even for out parameters, as the type
	       and number of elements must be known.

 * "new_default" : required only for in parameters which have the flag WEED_PARAMETER_VARIABLE_ELEMENTS set. 
                   It tells the host the default value of
                   new elements which may be added. It should have 1
                   value, except for COLOR parameters which may
                   additionally have 3 or 4 values depending on the "colorspace".
		   Required for in parameters only.


 * "hint" : WEED_SEED_INT : subdivides parameters into different kinds
 [see below]

'''Optional leaves''':[[BR]]
 * "flags"            : WEED_SEED_INT : bitmap of parameter flags

 * "description"      : WEED_SEED_STRING : parameter description

 * "interpolate_func" : WEED_SEED_VOIDPTR : pointer to interpolate_func pointer.
   		      	 See below, Plugin Functions. For in parameters only.

 * "gui" : WEED_SEED_PLANTPTR : each parameter_template (for in_parameters) can have a
 "gui" leaf. This leaf points to a plant of type
 GUI. Within the GUI plant can be additional leaves to assist the host
 to display this particular parameter. The plugin can create it, and
 set leaf values in it in weed_setup() and/or in init_func().

 * Every filter can have internal data stored in leaves
 inside this plant, and host MUST NOT change their values or make them
 READONLY for the plugin. Those internal leaves MUST have keys prefixed with "plugin_". The plugin is responsible for weed_free()ing
 any memory buffers in the deinit_func.


==== PARAMETER HINTS ====

The "hint" is a mandatory WEED_SEED_INT leaf of every parameter; the defined values are:

 * WEED_HINT_INTEGER
 * WEED_HINT_FLOAT
 * WEED_HINT_TEXT
 * WEED_HINT_SWITCH
 * WEED_HINT_COLOR

Depending on the "hint" parameter seed type additional leaves are:

 * WEED_HINT_INTEGER
"value" and "default" are constrained by min and max: min <= value <= max
The "default" leaf can only be of seed type WEED_SEED_INT. "default"
may have any number of elements.

 * "min" : WEED_SEED_INT : minimal value of the parameter, MANDATORY for in parameters (optional for out parameters)
 * "max" : WEED_SEED_INT : maximal value of the parameter, MANDATORY for in parameters (optional for out parameters)
 * "wrap" : WEED_SEED_BOOLEAN : WEED_TRUE indicates that the "value" should wrap when going below min or above max, OPTIONAL
 * "transition" : WEED_SEED_BOOLEAN : WEED_TRUE Indicates that this
 parameter is a transition, (i.e. at min the effect is fully "off", at
 max it is fully "on") OPTIONAL. For in paramters only.

 * WEED_HINT_FLOAT
"value" and "default" are constrained by min and max: min <= value <= max
The "default" leaf can only be of seed type
WEED_SEED_DOUBLE. "default" may have any number of elements.

Additional leaves that hint causes:
 * "min" : WEED_SEED_DOUBLE : minimal value of the parameter, MANDATORY for in parameters (optional for out parameters)
 * "max" : WEED_SEED_DOUBLE : maximal value of the parameter, MANDATORY for in parameters (optional for out parameters)
 * "wrap" : WEED_SEED_BOOLEAN : WEED_TRUE indicates that the "value"
 should be wrapped when going below min or above max, OPTIONAL
 * "transition" : WEED_SEED_BOOLEAN : WEED_TRUE Indicates that this
 parameter is a transition, (i.e. at min the effect is fully "off", at
 max it is fully "on") OPTIONAL. For in parameters only.


 * WEED_HINT_TEXT
Hint text means a string, which can be used for passing strings.
The "default" leaf can only be of seed type
WEED_SEED_STRING. "default" may have any number of elements.

 * WEED_HINT_SWITCH 
Hint switch can be used for passing yes/no choices.
The "default" leaf can only be of seed type
WEED_SEED_BOOLEAN. "default" may have any number of elements. It may
only take values WEED_TRUE and WEED_FALSE.

Additional leaves that hint causes:
 * "group" : WEED_SEED_INT : for all in_parameters with the same
 non-zero group: the template "default" may only have a
 single value, and WEED_PARAMETER_VARIABLE_ELEMENTS may not be set. 
 Only one parameter per non-zero group may have a "default" of WEED_TRUE. 
 The host must ensure that only one parameter per non-zero group has a 
 "value" of WEED_TRUE. 

 
 * WEED_HINT_COLOR
Hint color can be used for passing colors. Colors are represented as a
list of elements of type WEED_SEED_DOUBLE or WEED_SEED_INT. Depending on the
"default", host knows the seed type of "value".

Additional leaves that hint causes:
 * "min" : WEED_SEED_DOUBLE or WEED_SEED_INT; array of N elements: minimal value of the parameter, MANDATORY for in parameters (optional for out parameters)
 * "max" : WEED_SEED_DOUBLE or WEED_SEED_INT; array of N elements: maximal value of the parameter, MANDATORY for in parameters (optional for out parameters)
 * "colorspace" : WEED_SEED_INT : colorspace (see below), MANDATORY

==== Number of elements in the leaves ====
The "default" leaf must contain at least one value* UNLESS the plugin sets the parameter flag
WEED_PARAMETER_VARIABLE_ELEMENTS (see below); then the "default" may
take any number (0 or more) of elements,  [0 elements means the leaf
exists but has no value, since the SEED_TYPE must be known], and
"new_default" must be set.

The number of elements in "value" MUST match the number of elements in
"default" UNLESS the plugin sets the parameter flag
WEED_PARAMETER_VARIABLE_ELEMENTS (see below); then the "value" may
take any number (0 or more) of elements, [0 elements means the leaf
exists but has no value, since the SEED_TYPE must be known], and
"new_default" must be set.

The only exception is for "COLOR" parameters; there the number of
elements in "default" and "value" MUST always be a multiple of 3 or 4
(depending on the "colorspace") - the multiple must be 1 or higher unless WEED_PARAMETER_VARIABLE_ELEMENTS is set, in which case it may be 0 or higher.

The number of elements in each of "min" and "max" can be either 1, or equal to
the number of elements in "default". If the plugin sets the flag
WEED_PARAMETER_VARIABLE_ELEMENTS for the parameter, then the number of elements in each of "min" and "max" may only
be 1.

Note:

There is a further exception for "COLOR" parameters; there the number of
elements in "min" and "max" may be:

1 (each element uses the same min and/or max)
n (where n is 3 or 4 depending on colorkey)
N (where N is a multiple of 3 or 4, matching the number of elements in "default").

The last option is not valid if the parameter has the flag bit
WEED_PARAMETER_VARIABLE_ELEMENTS set.



* It is highly recommended to use exactly one value (or 3 or 4 values for color type parameters) for "default", 
  unless WEED_PARAMETER_VARIABLE_ELEMENTS is set.



== PLANT TYPE PARAMETER ==

Input parameter leaves should only be changed by the host, and
output parameter "value" only by the plugin. Parameters MUST match
one to one with parameter templates (same order, same number). For output 
parameters, the host should create the parameters from their templates, but not set the "value" leaf.


'''Mandatory leaves''': [[BR]]
 * "template" : WEED_SEED_PLANTPTR : pointer to the parameter template

 * "value" : seed type of the value MUST match the type of "default"
	     leaf of the parent_template. Lists/arrays can be implemented by
	     setting multiple elements in "default" (fixed list length), 
	     or by setting the parameter flag bit WEED_PARAMETER_VARIABLE_ELEMENTS
	     (variable list length). 

	     For out parameters:
	      this leaf is set by the plugin, first in init_func
	     (where it should be set to the default), then in process_func. If it holds one or more strings,
	     or an array, it must be set to NULL in the deinit_function (to avoid leaking memory)


'''Optional leaves''':[[BR]]
 * "timecode" : WEED_SEED_INT64 : time in ticks (1/100 of a
				  microsecond) used in "interpolate_func"; or for out parameters, the
				  timecode when the "value" was last set.

 * "ignore" : array of WEED_SEED_BOOLEAN : for interpolation of in parameters with
	      multiple elements in "value", "ignore" can be used to block "value"
	      elements which are to be ignored at that timecode. Thus, if
	      present, the number of elements in "ignore" should match the number of elements in
	      "value" at the timecode (except for COLOR parameters,
	      where the number of elements in "ignore" is divided by 3
	      or 4 depending on "colorspace"). A setting of WEED_TRUE indicates the
	      corresponding element in "value" should *not* be considered an
	      interpolation point (i.e. it is just a "filler" element).

 * Every filter can have its internal data stored in leaves
 inside this plant, and host MUST NOT change their values or make them
 READONLY for the plugin. Those internal leaves MUST have keys
 prefixed with "plugin_". The plugin is responsible for weed_free()ing
 any memory buffers in the deinit_func.

== PLANT_TYPE_GUI ==

This plant type has differing properties depending on whether it is
referenced from (i.e. contained in) filter_instance or from a parameter_template.

==== filter_class GUI ====
Plugin may set any of these leaves in weed_setup(). After this they should be set READONLY for the plugin.

'''Mandatory leaves''': [[BR]]
 * "layout_scheme" : WEED_SEED_STRING : string defining the layout
 scheme used in the rest of the plant

'''Optional leaves''': [[BR]]

 * "icon"         : WEED_SEED_STRING : name of the associated icon (if
                                       any) in the icons subdirectory [see below - Plugin locations/format]

 * "hidden" : WEED_SEED_BOOLEAN : if set to WEED_TRUE, the filter
   may be hidden from user menus by the host. Intended for internal type filters.

 * other optional leaves depend on the "layout_scheme" used

 * Every filter can have its internal data stored in leaves
 inside this plant, and host MUST NOT change their values or make them
 READONLY for the plugin. Those internal leaves MUST have keys
 prefixed with "plugin_". The plugin is responsible for weed_free()ing
 any memory buffers in the deinit_func.


==== parameter_template GUI ====
Plugin may set and change these leaves in weed_setup() and/or in
init_func(). At all other times they should
be set READONLY for the plugin. If the filter is re-inited
(e.g. because a flagged parameter value was changed, or because a
channel size or palette was changed), then the
READONLY_PLUGIN flag should be cleared by the host before calling init_func(), then set again afterwards.
An exception to this is "display_value", which can be set by the
plugin whenever "display_func" (if defined) is called.

All of these leaves indicate optional functionality for the
host. For example, the plugin should not rely on setting "maxchars" to
ensure a string is constrained to certain length, neither should it
rely on setting "copy_value_to" to force the host to set indentical
"values" for two parameters.


'''Optional leaves''': [[BR]]
 * "label" : WEED_SEED_STRING : label for display

 * "use_mnemonic" : WEED_SEED_BOOLEAN : WEED_TRUE indicates whether "label" uses
    underscore as mnemonic

 * "choices" : WEED_SEED_STRING : n values for a choice: only valid
   for INT parameters, the "value" element(s) indicate the selected
   element(s); "min" and "max" must constrain "value" to valid choices;
   0 indicates first element in "choices". A value of -1 (if
   allowed) indicates "no selection". For non-INT parameters, this
   leaf will be ignored. If "choices" is present, then "wrap" and
   "step_size" may be ignored by the host.

 * "decimals" : WEED_SEED_INT : number of decimals for a FLOAT or
   COLOR (FLOAT) hint. For other hints this will be ignored.

 * "step_size" : seed type matches type of "default" : step value for
   INTEGER, FLOAT and COLOR type parameters : used for spin buttons, etc.

 * "maxchars" : WEED_SEED_INT : max display length in (utf-8) chars for a
   STRING hint. For other hints, this will be ignored. A value < 1 should
   also be ignored.

 * "display_func" : WEED_SEED_VOIDPTR : pointer to a function pointer that 
   returns a value
   for display. See below, Plugin Functions. This can be disabled by
   setting it to NULL.

 * "display_value" : WEED_SEED_STRING : Value to be displayed by the
   host. The plugin should only set this leaf if and when "display_func" is
   called by the host. See below, Plugin Functions.

 * "hidden" : WEED_SEED_BOOLEAN : if set to WEED_TRUE, the parameter
   may be hidden by the host.

 * "copy_value_to" : WEED_SEED_INT : index (0 means first parameter, 1
   means second, etc.)
   of another in_parameter : if the "value" of this parameter is changed, then the
   "value" of the parameter pointed to may be
   set to the same value. Both parameters MUST have the same HINT and
   number of elements in "default", otherwise this will be ignored. Only
   valid for in_parameters. If more than one parameter points to the
   same in_parameter, the behaviour is undefined. NOTE: this is not
   strictly GUI functionality. Even GUI-less hosts might want to implement
   this ! This can be disabled by setting it to a value < 0, or by
   setting it to point to itself.

 * Every filter can have its internal data stored in leaves
 inside this plant, and host MUST NOT change their values or make them
 READONLY for the plugin. Those internal leaves MUST have keys
 prefixed with "plugin_". The plugin is responsible for weed_free()ing
 any memory buffers in the deinit_func().


== PLUGIN FUNCTIONS ==

The only fixed function name the plugin MUST implement is weed_setup(), all other information is passed through respective plants (classes, functions, etc...)

==== weed_setup ====

{{{
    weed_plant_t *weed_setup(weed_bootstrap_f weed_bootstrap)
}}}

The host calls this first in a plugin, and passes in a pointer to a
function, weed_bootstrap, which must be called first by the plugin.

The typedef of weed_bootstrap_f is:
{{{
    weed_plant_t *weed_bootstrap_func (default_getter_f *value, int num_versions, int *plugin_versions)
}}}

The plugin must call this, passing in a pointer to a default_getter_f, an int
"number of Weed api versions supported" and an int array of those
versions.

If the host does not support any of the plugin's api versions, it will
return NULL. In this case the plugin should return NULL from the
weed_setup() function, so that the host can unload it.

Otherwise, the host will set value to point to a default getter
function in the host of the form:

{{{
   int default_getter(weed_plant_t *plant, const char *key, int idx, weed_function_t value)
}}}

The plugin should call default_getter to get all of its API functions from the
host_info plant. It can also retrieve the "api_version" leaf (using the
retrieved weed_leaf_get() ) to find out which of its API version the host assigned it. 

The default getter should use only standard memory functions, so that the plugin can 
bootstrap the real memory functions (weed_malloc, weed_free, weed_memset and weed_memcpy).

Normally a plugin would use a utility library which would take care of
calling the bootstrap function and getting its API functions.



The weed_setup() function returns a PLUGIN_INFO plant that
specifies what is the content of this plugin - 
which filter classes it has, who is the maintainer, etc.

The Plugin implements weed_setup() in following way: the PLUGIN INFO plant is first created by using weed_plant_new(). 
The individual filters are then created and added to the "filters"
leaf in the PLUGIN INFO plant.
If no filters can be created (because of memory or other problems or
version mismatches), the function should return NULL.

The returned plant MUST have '''type''' WEED_PLANT_PLUGIN_INFO.



To recap:

1) host calls weed_init() with an API version to get its weed functions

2) host dlopens a plugin, then calls weed_setup() in the plugin, passing in the bootstrap_fn

3) plugin calls the bootstrap_fn in the host, passing ptr to default_getter and api versions

4) host selects api version it will use, and sets default_getter function for plugin

5) plugin uses default_getter function to get its api functions, depending on the api version

6) plugin sets its plugin_info plant and returns it as the value from weed_setup()



This may seem complex, but it provides several advantages:

- each API version can have its own set of core functions

- host and plugin can negotiate the plugin API version and select the latest which they both 
  support

- function overloading can be done. The host and plugin can have functions with the same name
  but which actually resolve to different functions (for example, host and plugin both use
  weed_leaf_set, although these actually resolve to weed_leaf_set_caller with different caller 
  flags - this allows us to implement READ_ONLY_HOST and READ_ONLY_PLUGIN). The plugin cannot 
  access the host's version of the function.

- the host can have access to functions which the plugin cannot, for example, only the host 
  can call weed_leaf_delete, weed_plant_free and weed_leaf_set_flags







==== init_func ====
This is an optional function in Weed.


{{{
    int init_func(weed_plant_t *filter_instance)
}}}

The host calls this and passes in the desired filter_instance.
The filter plant instance passed to the init_func MUST have been
correctly setup to match the filter class it relates to, 
this means that all the mandatory leaves of input and output channels and of input parameters MUST be set.
The function returns a weed error code (see below).

The init_func() function allows the plugin to create any internal
memory structures it needs; the plugin can store internal data as
leaves that have keys prefixed with "plugin_" in the filter_instance 
(see the definition of filter instance plant). The plugin can also (re)set
the "gui" settings for parameter_templates (see below).

==== process_func ====
This is a mandatory function in Weed.

{{{
    int process_func(weed_plant_t *filter_instance, long timestamp)
}}}

Host calls this for each processing cycle; the plugin can do its frame
processing here. The function returns a weed error code (see
below). Timestamp is the presentation time in ticks (1/100 of a microsecond) (can be e.g. time since playback start). The function returns a weed error code (see below). 



==== deinit_func ====
This is an optional function in Weed.


{{{
    int deinit_func(weed_plant_t *filter_instance)
}}}

The host will call this to allow the plugin to free() any internal
memory. Following this the host may free() the filter_instance
plant. The plugin does not need to free any plants or leaves; the host should take care of this.

==== weed_desetup ====
This is an optional function in Weed.

{{{
    void weed_desetup(void);
}}}

If the plugin has this function, the host should call it before
unloading the plugin. This is to allow the plugin to reset any
hardware, etc.

==== display_func ====
This is an optional function in Weed.

{{{
    void display_func(weed_plant_t *parameter);
}}}

For the given parameter, the plugin should examine its "value", get
its "template" leaf, get the "gui" leaf from this, and finally, set the
"display_value" in the "gui". The "display_value" should be of
seed_type WEED_SEED_STRING.  This "display_value" should be displayed
by the host instead of the normal parameter "value". 
"display_func" is an optional leaf of a parameter_template "gui". 
The host MUST ensure that "display_value" is writable by the plugin
before calling display_func(), and should set it readonly for the
plugin afterwards.

==== interpolate_func ====
This is an optional function in Weed.

{{{
    int interpolate_func(weed_param_t **in_params, weed_param_t *out_param);
}}}

The function takes a NULL terminated array of parameters for a single
parameter_template, with "timecode","value" and possibly "ignore" 
leaves, and returns a best guess for the "value" of out_param. The
in_params array MUST be in ascending "timecode" order. The "timecode"
leaf of out_param MUST be set. All the parameter values in_params and
out_param reference the same parameter_template. Interpolate_func is
an optional leaf of that parameter_template.

The value returned is actually a boolean. A return value of WEED_TRUE
means the "value" set in out_param is exact. A return value of
WEED_FALSE means that the "value" in out_param is a guess. In the
latter case, the host can recall the function with more elements in
in_params to get a more accurate result.

== HOST FUNCTIONS ==

The host provides just one mandatory function to the plugins:
weed_bootstrap (see above for its definition).

The bootstrap function takes a list of Weed api versions supported by the
plugin, sets a getter function, and returns a host_info plant, or NULL
if none of the plugin api versions are supported.

The plugin can use the getter function to get the leaves of the host
info plant.

The HOST_INFO plant can also have other optional leaves to provide
more information about the host, and optional functions.


== OUTLINE WEED PROCESS FLOW OVERVIEW ==

 * Host calls weed_init()
 * Host loads plugin (dlopen)
 * Host calls the weed_setup() function in the plugin.
 * plugin calls weed_bootstrap and host checks api_versions supported by
   the plugin. If it finds a version which it can use it sets this in
   HOST_INFO and returns the HOST_INFO to the plugin, otherwise it must return NULL to the plugin.
 * plugin uses default_getter to get the leaves of the HOST_INFO plant.
   In weed_setup(), for each filter class, the plugin creates and
   initializes a plant of type WEED_PLANT_FILTER_CLASS and adds it
   to the "filters" leaf of the returned PLUGIN_INFO plant. 

 * Host creates a FILTER_INSTANCE: Host examines the in_channel and out_channel plants, and sets the "disabled" flag for any optional channels it does not wish to use. It also checks "palette_list", selects a palette it would like to start using on that channel and sets the chosen value in the "current_palette" leaf. It also sets the sizes ("width" and "height" leaves) if the plugin left them as zero. All input parameters have to have values set at this point. This means host now has a plant that it will instantiate.

 * Host calls init_func() [if it exists] from the filter info plant, passing a pointer to a FILTER_INSTANCE it would like to instantiate.
 * Plugin now knows the channel sizes, palettes and which channels are in use. The plugin may now weed_malloc() internal data.

 * Host may now change parameter values (respecting "max" and "min" leaves) and it after that it may call process_func() in the plugin, passing in the initialised FILTER_INSTANCE. 
 * When the host has finished with the FILTER_INSTANCE, or if it needs
   to re-initialise it, the host must call deinit_func() in the plugin
 [if the plugin has one], passing in a pointer to the FILTER_INSTANCE. The plugin MUST now weed_free() any internally allocated data.

 * Host can now weed_plant_free() the FILTER_INSTANCE, or it can reuse the FILTER_INSTANCE by calling init_func() once more.

== Plugin locations ==

The list of directories to be searched can be set in the environment
variable WEED_PLUGIN_PATH; directories in WEED_PLUGIN_PATH should be separated by
colons (:) the indicated directory and one level of subdirectories
should be searched for each entry. The directories should be searched
in order, first to last, and any effects with duplicate Hashnames may
be ignored. [See hashnames, below].

Icons for each filter may be placed in a /icons subdirectory.

Redonly data files for each filter may be placed in a /data subdirectory.
The host must run all plugin functions from within the directory above it, so that the plugin can easily 
find its data files as data/file. In case the plugin needs to write to a file, it should either request a directory 
location from the user (as a parameter), or else use (a subdirectory of) /tmp.

Note: There is no need for API versioning of the weed directories themselves, as the
weed_bootstrap system takes care of different Weed API versions.


== Weed Hashnames ==

The hashname of a Weed filter is the simple concatenation of: plugin
name, filter name, author and filter version.


== WEED FLAGS AND TYPES ==


==== Boolean values ====

  * WEED_TRUE 1

  * WEED_FALSE 0



==== Plant types ====

  * WEED_PLANT_HOST_INFO          255

  * WEED_PLANT_PLUGIN_INFO        1

  * WEED_PLANT_FILTER_CLASS       2

  * WEED_PLANT_FILTER_INSTANCE    3

  * WEED_PLANT_CHANNEL_TEMPLATE   4

  * WEED_PLANT_PARAMETER_TEMPLATE 5

  * WEED_PLANT_CHANNEL            6

  * WEED_PLANT_PARAMETER          7

  * WEED_PLANT_GUI                8

  * WEED_PLANT_EVENT              256

  * WEED_PLANT_EVENT_LIST         257


==== Seed types ====

 * WEED_SEED_INT        1

 * WEED_SEED_DOUBLE     2

 * WEED_SEED_BOOLEAN    3

 * WEED_SEED_STRING     4

 * WEED_SEED_INT64      5

 * WEED_SEED_VOIDPTR    65 

 * WEED_SEED_PLANTPTR   66



==== Weed parameter hints ====

 * WEED_HINT_UNSPECIFIED  0
   Parameter is of an unknown type. Plugins should never use this
   directly, it is intended only for wrapper plugins which may need to
   convert unknown parameter types. These parameter types may or may not
   have "min" and "max". They will have at least "name" and "default" leaves.

 * WEED_HINT_INTEGER  1

 * WEED_HINT_FLOAT  2

 * WEED_HINT_TEXT  3

 * WEED_HINT_SWITCH  4

 * WEED_HINT_COLOR  5

Parameter hints >=1024 are reserved for custom parameters.

==== Weed colorspaces ====

 * WEED_COLORSPACE_RGB  1

 * WEED_COLORSPACE_RGBA  2


Colorspaces >=1024 are reserved for custom color spaces.

==== Weed palette types ====

Palettes are all unsigned in Weed.

Some palettes have aliases; these are shown on the same line.

'''Special Palettes'''
Palette number 0
{{{
WEED_PALETTE_END
may be used in setup_func() in an int *palettes, denotes the end of the palette list; "palette_list" property
}}}

'''RGB Palettes'''
Palette numbers >0 and <512
{{{
WEED_PALETTE_RGB888         WEED_PALETTE_RGB24   1  :: packed, 8 bits per colour channel, 24 bits per pixel, RGB
WEED_PALETTE_BGR888         WEED_PALETTE_BGR24   2  :: packed, 8 bits per colour channel, 24 bits per pixel, BGR
WEED_PALETTE_RGBA8888       WEED_PALETTE_RGBA32  3  :: packed, 8 bits per colour channel, 32 bits per pixel, RGBA
WEED_PALETTE_BGRA8888       WEED_PALETTE_BGRA32  7  :: packed, 8 bits per colour channel, 32 bits per pixel, BGRA
WEED_PALETTE_ARGB8888       WEED_PALETTE_ARGB32  4  :: packed, 8 bits per colour channel, 32 bits per pixel, ARGB
WEED_PALETTE_RGBFLOAT                            5  :: packed, 32 bit float per channel RGB (range is 0. to 1.)
WEED_PALETTE_RGBAFLOAT                           6  :: packed, 32 bit float per channel RGBA (range is 0. to 1.)

}}}
'''YUV Palettes'''
Palette numbers >=512 and <1024

Ranges are 16-235 for Y, 16 - 240 for U and V, unless
WEED_YUV_CLAMPING_UNCLAMPED is set in "YUV_clamping" for
channel/channel_template (in which case the range is 0 - 255 for each component).

Subspace may be any YUV subspace, unless "YUV_subspace" is set for channel/channel_template.

All channels are assumed to be 8 bit.

{{{
WEED_PALETTE_YUV422P           WEED_PALETTE_YV16    513
[Official name 'YV16', 8 bit Y plane followed by 8
   bit 2x1 subsampled U and V planes. Planar.]


WEED_PALETTE_YUV420P           WEED_PALETTE_YV12    514
[8 bit Y plane followed by 8 bit 2x2 subsampled U and V planes. Planar.
   (Official name YV12)]

WEED_PALETTE_YVU420P           WEED_PALETTE_I420         WEED_PALETTE_IYUV   515
[Same as YUV420P , but U and V are swapped. Planar.
      (Official name IYUV)]

WEED_PALETTE_YUV444P   516
[unofficial. 8 bit Y plane followed by 8 bit U and V planes, no
   subsampling. Planar.]

WEED_PALETTE_YUVA4444P   517
[Unofficial, like YUV444P but with Alpha. Planar.]

WEED_PALETTE_UYVY8888         WEED_PALETTE_UYVY     519
[YUV 4:2:2 (Y sample at every pixel, U and V sampled at every second
   pixel horizontally on each line). A macropixel contains 2 pixels in 1
   u_int32. Packed. If the "YUV_subspace" is set to bt709, this
   becomes HDYC.]

WEED_PALETTE_YUYV8888         WEED_PALETTE_YUYV          WEED_PALETTE_YUY2     518
[Like UYVY but with different component ordering within the
   u_int32 macropixel. Packed. Also known as YUY2]

WEED_PALETTE_YUV411                   WEED_PALETTE_IYU1        520
[IEEE 1394 Digital Camera 1.04 spec. Is packed YUV format
with a 6 pixel macroblock structure containing 4 pixels.
Ordering is U2 Y0 Y1 V2 Y2 Y3. Uses same bandwith as YUV420P
Used for SMPTE DV NTSC / DVCPRO PAL (???)]
Also known as IYU1.

}}}

WEED_PALETTE_YUV888                   WEED_PALETTE_IYU2      521
Packed YUV palette, no subsampling. Also known as IYU2

WEED_PALETTE_YUVA8888                                        522
Packed YUV palette with alpha channel. No subsampling.


'''Alpha Palettes'''
Palette numbers >=1024 and <2048

Alpha palettes are generally used as mask/transparency channels but may be used to store any position dependant data.

{{{
WEED_PALETTE_A1       1025
WEED_PALETTE_A8       1026
WEED_PALETTE_AFLOAT   1027
}}}

The range for AFLOAT is 0.0 (fully transparent) to 1.0 (fully opaque) for transparency. 
For other data a different range may be used.


Palette numbers >=2048 are reserved for custom palettes.

==== Filter flags ====

 *  WEED_FILTER_NON_REALTIME  1  [[BR]]
    non-realtime filter: the filter is too slow to use in realtime processing.
    Generally, filters which take more than about 0.1 second to process
    a frame are considered non-realtime.

 *  WEED_FILTER_IS_CONVERTER  2  [[BR]]
    This flag bit should be set if the plugin does not alter the image
    pixels except for resizing or palette conversion between in
    channel and out channel(s). It should only be set for the
    following types of plugins: plugins which only resize the in frame
    to out frame(s); plugins which only convert the palette from in
    frame to out frame(s), plugins which simply duplicate the in frame
    to out frame(s), and for plugins which handle only audio, where the
    plugin only alters the audio volume [see the Weed Audio
    Extension].

    It is used to assist with categorisation of the
    plugin type. To be useful, such filters may also want to use the
    *_CAN_VARY channel flags below.

 * WEED_FILTER_HINT_IS_STATELESS  4  [[BR]]
   This is optional, if the filter is stateless (i.e. not dependant on
   past calls to process_func() ) then this this flag
   bit can be set. Used for compatibility with other plugin architectures.


 * WEED_FILTER_HINT_MAY_THREAD  32  [BR]]
   Indicates that hosts can achieve threading by splitting the destination frame(s) into 
   slices, setting "offset" for those channels, and calling process_func 
   multiple times with the same timestamp. Do not set this if the plugin needs to access the entire 
   destination frame(s). The original instance should be passed in as the slice with offset 0. 
   Use this instance if you want to update any "plugin_*" values. Do not use this on filters which 
   use the channel flag WEED_CHANNEL_SIZE_CAN_VARY.


 * WEED_FILTER_PROCESS_LAST  16  [[BR]]
   This flag denotes that the host should process this filter after other filters have been 
   applied. Examples might be a subtitle filter or an audio mixer.



Flag bits >=30 are reserved for custom flags.

==== Channel template flags ====

 *  WEED_CHANNEL_REINIT_ON_SIZE_CHANGE  1  [[BR]]
    host must reinit the plugin before calling process_func() if the
    channel size (height or width in (macro)pixels) is changed.

 *  WEED_CHANNEL_REINIT_ON_PALETTE_CHANGE  2  [[BR]]
    host must reinit the plugin before calling process_func() if the channel palette is changed

 *  WEED_CHANNEL_CAN_DO_INPLACE  4  [[BR]]
    If this flag bit is set, the filter can do inplace operations.
    Hosts can select this mode by setting "pixel_data" of this out channel
    equal to the "pixel_data" of the corresponding (same number; not counting "disabled" channels) 
    in channel. The flag bit is only valid for OUT channels. 

 *  WEED_CHANNEL_SIZE_CAN_VARY  8  [[BR]]
    In Weed, all channels are assumed to have the same size (width and height,
    but not necessarily rowstrides)
    as the first non-disabled in_channel (or first non-disabled
    out_channel for filters that have no in channels). If this flag
    bit is set, then the host can set this channel to a different
    size. For fixed size channels, it is not necessary to set this.
    Plugins should not resize unless it is unavoidable, or they have
    a "high-performance" resize routine. Otherwise resizing should be
    left to the host.

 *  WEED_CHANNEL_PALETTE_CAN_VARY  16  [[BR]]
    In Weed, all channels are assumed to have the same "current_palette"
    as the first non-disabled in_channel (or first non-disabled
    out_channel for filters that have no in channels). If this flag
    bit is set, then the host can set this channel to a different
    allowed palette. Plugins should not perform palette conversions
    unless it is unavoidable, and they have a "high-performance" palette
    conversion routine. Otherwise palette conversion should be left to
    the host.

 *  WEED_CHANNEL_REINIT_ON_ROWSTRIDES_CHANGE  32  [[BR]]
    host must reinit the plugin before calling process_func() if the
    any of the rowstrides are changed. Note that	 
    changing the palette can sometimes affect the rowstrides. [API 130 and higher].

* WEED_CHANNEL_ALPHA_OUT_PREMULT  64  [[BR]]
    For out channels only (ignored for in channels).
    Indicates that alpha is pre-multiplied with the other channels.
    e.g RGB=0xFFFFFF. We apply an alpha of 0x80 -> we store 0x80808080 (colour vals are stored as C * alpha / 255.)
    For compatibility with applications.


Flag bits >=30 are reserved for custom flags.




==== Channel flags =====

* WEED_CHANNEL_ALPHA_PREMULT  1  [[BR]]
    Indicates that alpha is pre-multiplied with the other channels.
    e.g RGB=0xFFFFFF. We apply an alpha of 0x80 -> we store 0x80808080 (colour vals are stored as C * alpha / 255.)
    For compatibility with applications.






==== Parameter template flags ====

 * WEED_PARAMETER_REINIT_ON_VALUE_CHANGE  1  [[BR]]
   host must reinit the plugin if the parameter "value" is
   changed. This is to allow the plugin to alter the "gui" settings
   for the parameters and for the instance. The host must temporarily
   allow the plugin read/write access to the "gui" plants during the init.
   Not valid for out parameters.


 * WEED_PARAMETER_VARIABLE_ELEMENTS  2  [[BR]]
   plugin can set this to inform the host that the number of elements in
   the parameter "value" leaf can vary. If not set, then the number of
   elements in "value" is fixed; it must always match the number of elements in
   "default".

   If this is set, then the plugin may only use one element
   in each of "min" and "max" for the parameter, except for COLOR
   parameters which may use 3 or 4 depending on the "colorspace".

   Note also that 0 is a valid number of elements. [0 elements means the leaf
   exists but has no value, since the SEED_TYPE must be known.]

   If this is set for an in parameter, the plugin MUST also set the "new_default" leaf for
   the parameter.

   This flag is assumed for out_parameters.


 * WEED_PARAMETER_ELEMENT_PER_CHANNEL  4  [[BR]] - API version 110 and higher
   This flag bit indicates that each element in the parameter "value"
   corresponds to one input channel. If a
   channel template has "max_repeats" set to other than 1, then
   WEED_PARAMETER_VARIABLE_ELEMENTS is also assumed to be set for the
   parameter, and so the "new_default" leaf must also be set [see above].
   Valid for input parameter templates only.


Flag bits >=30 are reserved for custom flags.

==== YUV sampling types ====

Where chroma subsampling is used, chroma values are assumed to be centered between luma samples, unless
specified otherwise.

 * WEED_YUV_SAMPLING_DEFAULT  0  : Default subsampling.

 * WEED_YUV_SAMPLING_JPEG  0   : Chroma is sampled at half the horizontal
   and half the vertical frequency. (YUV 4:2:0). Chroma samples are
   alternated horizontally between luma samples (like yuyv-yuyv)

 * WEED_YUV_SAMPLING_MPEG  1  : Same as JPEG, but Chroma samples are
   horizontally aligned. There is notion of fields. Note: only mpeg2 uses this, mpeg1 uses JPEG sampling.
   (YUV 4:2:0 only) (like yuvy-yuvy)

 * WEED_YUV_SAMPLING_DVPAL  2  : Subsampling per field, chroma samples
   are located above and below luma samples, and CB and CR samples are located on alternate lines (YUV 4:2:0) 

 * WEED_YUV_SAMPLING_DVNTSC  3  : Chroma is sampled at a reduced
   horizontal frequency but is aligned horizontally with luma samples
   (YUV 4:2:2 / YUV 4:1:1) [similar to mpeg, but vertically aligned]

Sampling types >=1024 are reserved for custom samplings.


==== YUV clamping ====

 * WEED_YUV_CLAMPING_CLAMPED  0  :: the default if not present (clamped to 16-235,
   16-240, 16-240)                                                 

 * WEED_YUV_CLAMPING_UNCLAMPED  1  :: Y, U and V are unclamped (0 - 255 range
   for each) [used in e.g. in jpeg]

clamping types >=512 are reserved for custom clampings.

==== YUV subspace ====

 * WEED_YUV_SUBSPACE_YUV  0   :: Any YUV colourspace may be used, with Y representing the luma 
   channel, and U and V as colour offsets. Optional, since this is the default if not specified.

 * WEED_YUV_SUBSPACE_YCBCR   1  :: Standard YUV (Y'CbCr 601) using conversion
   factors (Kr=0.299, Kb=0.114, UV offset 128). The plugin should specify this if for example 
   it sends to or receives from external sources.

 * WEED_YUV_SUBSPACE_BT709   2  :: BT.709 high definition TV which uses different
   conversion factors than Y'CbCr digital/ananlog (Kr=0.2125, Kb=0.0721, UV offset 128)

subspace types >=512 are reserved for custom subspaces.


==== Weed errors ====

 *  WEED_NO_ERROR				[0]

 *  WEED_ERROR_MEMORY_ALLOCATION		[1]

 *  WEED_ERROR_LEAF_READONLY			[2]

 *  WEED_ERROR_NOSUCH_ELEMENT[[BR]]             [3]

 *  WEED_ERROR_NOSUCH_LEAF[[BR]]                [4]

 *  WEED_ERROR_WRONG_SEED_TYPE[[BR]]            [5]



==== Filter errors ====

 *  WEED_ERROR_TOO_MANY_INSTANCES  6  [[BR]]
    can't create: plugin allows only limited number of filter instances, returned from init_func()

 *  WEED_ERROR_HARDWARE  7  [[BR]]
    there was a hardware error using the filter; returned
    from init_func() or from process_func(). If returned from
    process_func(), the filter should be deinited/reinited.

 *  WEED_ERROR_INIT_ERROR  8  [[BR]]
    other unspecified error during initialisation

 *  WEED_ERROR_PLUGIN_INVALID  64  [[BR]]
    one or more of the filter_classes is no longer valid. The filter
    instance should be deinitialised and not reused; returned from process_func().


Error numbers >=1024 are reserved for custom errors.

